The issue could be prompted by a pump blockage. To clean the pump, follow the instructions below, or see the video:
- Turn the appliance off.
- Pull out the mains plug.
- Open and remove the service flap.
- Drain off all water using a drainage hose or by removing the pump cover slowly.
- Clean the interior, the thread and the housing of the pump so that the impeller is able to rotate.
- Refit the pump cover and screw back firmly.
- To check the pump for leakage and the power of the pump, pour 1 litre of water into the detergent drawer.
- Check for any leakage.
- If the pump is sealed watertight, start the pumping programme.
If this does not work, check the drain hose using the instructions below.
